KNX LED Controller, 4CH, 5A – Sunricher SR-KNX9512FA. Power supply
Bus Operating voltage: 21–30V DC, via the KNX/EIB bus; Input voltage: 12–36V DC; Output
4 channels: Yes; Inputs/outputs: Using screwless connection terminal.
| Power supply Bus Operating voltage | 21–30V DC, via the KNX/EIB bus |
|---|---|
| Input voltage | 12–36V DC |
| Output 4 channels | Yes |
| Rated current | 5A × 4CH |
| Load voltage | 12–36V DC (constant voltage) |
| Safety | Short-circuit, over voltage and over temperature protection |
| Connections EIB/KNX | EIB bus connection terminal |
| Inputs/outputs | Using screwless connection terminal |
| Button and red LED | For assigning the physical address |
| Green LED flashing | Indicates the application layer running normally |
| LEDs for Output | Indicate output status per channel: LED on = output active, LED off = no output |
| Manual buttons | Short press = switch, long press = relative dimming |
| OT. LED | Indicates over-temperature, >70°C |
| OV. LED | Indicates over-voltage, >40V DC |
| Type of protection | IP20, EN 60 529 |
| Operating temperature | -5°C...+45°C |
| Storage temperature | -25°C...+55°C |
| Transport temperature | -25°C...+70°C |
| Humidity | <93%, except dewing |
Specifications
| Current per channel | 5A × 4CH |
| Supply voltage | 21–30V DC, via the KNX/EIB bus |