KNX Room Temperature Controller standard – black – Eelectron RT07A01KNX-3 thermostat. Power supply: Via KNX bus, 21–32 V DC (SELV); Current consumption: Max. 20 mA at 29 V / 24 mA at 21 V; economy mode max. 12 mA at 29 V; Rear input – digital mode: 1 input for dry contacts; scanning voltage 3.3 V DC; max. cable length 10 m (33 ft), twisted; Mounting: Flush wall box, 2-module.
| Power supply | Via KNX bus, 21–32 V DC (SELV) |
|---|---|
| Current consumption | Max. 20 mA at 29 V / 24 mA at 21 V; economy mode max. 12 mA at 29 V |
| Rear input – digital mode | 1 input for dry contacts; scanning voltage 3.3 V DC; max. cable length 10 m (33 ft), twisted |
| Temperature sensor | −5…+55 °C (23…131 °F); resolution 0.01 °C; tolerance typ. ±0.5 °C |
| Controls | 7 capacitive buttons; RGB LED bar |
| Thermostat | 2-stage with integrated PI controller |
| Mounting | Flush wall box, 2-module |
| Dimensions (W × H × D) | 96 × 96 × 36 mm (3.8 × 3.8 × 1.4 in) |
| Weight | 0.14 kg (0.31 lb) (datasheet: approx. 130 g, 220 g with glass) |
| Group addresses / associations | 250 / 250 |
| Enclosure / protection | PC-ABS; IP20 (EN 60529) |
| Operating temperature | −5…+45 °C (23…113 °F); storage −20…+55 °C; max. 90 % RH non-condensing; indoor, dry places |
| Standards | EN 63044-3; EN 63044-5-1 / -5-2; EN 50491-2; LVD 2014/35/EU; EMC 2014/30/EU; KNX certified |
| Finish | Black |
| ETS application | Eelectron Rx07A01KNX application (download from eelectron.com) |
Specifications
| Mounting | Flush wall box, 2-module |