DALI-2 Presence Detector with light control – white – Eelectron PD00A01DL2-1. Power supply: Via DALI bus, 9.5–22.4 V DC (FELV); Current consumption: ≤ 10 mA; start-up time 250 ms; Inputs – digital mode: 3 inputs for dry contacts (pushbuttons); scanning voltage 3.3 V DC; max. cable length 10 m (33 ft), twisted; Enclosure / protection: PC-ABS; IP20 (EN 60529).
| Power supply | Via DALI bus, 9.5–22.4 V DC (FELV) |
|---|---|
| Current consumption | ≤ 10 mA; start-up time 250 ms |
| DALI-2 compliance | IEC 62386-101 ed. 2, -103 ed. 1; input instances 301 (digital inputs), 303 (presence), 304 (light) |
| Connections | DALI bus; rear 6-pole cabled connector, AWG 26, 100 mm (4 in) leads |
| Inputs – digital mode | 3 inputs for dry contacts (pushbuttons); scanning voltage 3.3 V DC; max. cable length 10 m (33 ft), twisted |
| Sensors | PIR presence; illuminance |
| Illuminance sensor | 50–20,000 lux |
| Enclosure / protection | PC-ABS; IP20 (EN 60529) |
| Operating temperature | −5…+45 °C (23…113 °F); storage −20…+55 °C; max. 90 % RH non-condensing; indoor use |
| Dimensions (ø × H) | 81 × 37 mm (3.2 × 1.5 in) |
| Weight | 0.1 kg (0.22 lb) (datasheet: approx. 120 g) |
| Standards | EN IEC 63044-3; EN IEC 63044-5-1 / -5-2; EN 50491-2; LVD 2014/35/EU; EMC 2014/30/EU; DALI-2 |
| Finish | White |
HDL
Browse HDL products →
HDL Preferred: the alternative we recommend
HDL KNX and smart building products, quoted within 24 to 72 hours.